Airbrush Cleaning Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airbrush cleaning station.
- Ocena
- 4,864 / 5
- Polubienia
- 251
- Pobrania
- 1508
- Wydruki
- 20
- Wyświetlenia
- 5863
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- GNU General Public License v3.0
Could not find a pot that was heavy enough and stable enough for my workspace. So Fusion to the rescue.
Made it as easy to print as possible with no supports.
Print Settings
4 bottom layers
3 top layers
3 perimeters
Printed with both a 0.4mm and 0.6mm hot-end successfully. 0.6mm nozzle means it is a bit of a tight fit on the thread so a little sanding or just running the threads together over and over to make them more smooth.
No supports needed.
I have printed in both PETG and PLA with waterproof results.
Assembly
Just a bit of CA glue between the top airbrush holder and lid. Use the filter basket to get the alignment right.
Put a piece of sponge or microfibre cloth in the filter basket to allow air but not fumes to escape.