Parts Box with Print-in-Place Latch and Nameplates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a large (full print-bed) box made for small tools or whatever you like.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1093
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a large (full print-bed) box made for small tools or whatever you like. It has a working latch and a nameplate holder to keep you informed of the contents. No support is needed and it prints pre-assembled.
Updated latch hinge to be a solid bar instead of a couple of nubs. This makes for a latch that can't fall off.
Updated latch to be 3mm shorter, this should make for a tighter closure.
Print instructions
Print at default settings. In my case, that's .2 at 15% no support. Use PLA (the shrinkage of other materials causes problems with tolerances). The gap between mating parts and hidges is 0.4mm This is a 24 hour print.
Added a MINI version of the model. For the MINI, the gaps are 0.3mm.