1 / 3
Drok 0-48V PSU brackets for universal DIN bracket (vertical)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick adapter so a PSU can be clipped onto a DIN rail using some universal brackets (on amazon)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a bracket for vertically mounting a DROK power supply unit (PSU) onto metal universal DIN rail clips (27.45mm x 48.29mm). It has tight press-fit openings for the M3 nuts, and countersunk holes for the M4 screws. Threads will cut when you insert the screws.
Per bracket, you'll need:
- Two (2) M4x8 button head screws
- Two (2) M3x8 button head screws
- Two (2) M3 nuts
So if you're printing two brackets, well… just double the number of hardware needed. :)
I printed them flat for strength,
My print settings:
- Rafts: No
- Supports: No (you could do touching buildplate for the nut cutouts, if you're paranoid)
- Resolution: 0.28 mm
- Infill: 20%
- Filament: PLA
If you're printing this for a hot location, consider a different filament type.