1 / 3
Skyrim-style Door Quest Plaque (manual 2-color version) — zdjęcie 1
1 / 3

Skyrim-style Door Quest Plaque (manual 2-color version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I was inspired by https://www.thingiverse.com/thing:446442 but created this version from scratch.

Ocena
5 / 5
Polubienia
49
Pobrania
191
Wydruki
4
Wyświetlenia
837
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Share Alike

I was inspired by https://www.thingiverse.com/thing:446442 but created this version from scratch.

It's designed to be printed in two colors with a manual filament change in the middle. It also has a provision for mounting on a nail.

The openscad source is included, mostly because if you have a multi-extruder setup you'll probably need it if you want to prepare a version that automatically prints in two colors.

Print instructions

Supports: No

Infill: 10%

Infill and resolution don't matter a great deal. I actually printed it at 50% scale.

Use PrusaSlicer's color change at layer function, or just pause the print at the appropriate height and change the filament from black to white. This is at 3mm in the full size model or 1.5mm in the model at 50% scale.

Tagi