1 / 6
Cord Holder for WaterPik Cordless Flosser - 2 Versions — zdjęcie 1
1 / 6

Cord Holder for WaterPik Cordless Flosser - 2 Versions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Conveniently store the end of the charging cable when not in use.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

Note : requires double-sided foam tape.

The WaterPik cordless water flosser uses a magnetically attached charging cable which is convenient to attach, but which simply gets in the way when not in use. This simple holder holds the end of the charging cable out of the way on the side of sink cabinet (see photo). It also allows the cable to be completely removed from the holder if necessary, without having to unplug it.

The holder comes in two versions for holding either one or two cables. It attaches to the any convenient surface using double-sided foam tape.

Print Instructions

Print in PLA using the 3mf file provided; otherwise :

  • 0.2mm layer height
  • 10 rectilinear infill
  • 2 perimeters

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/21263cfc9c087275dc05bf10/w/b27ac252659b5cf64fc86095/e/655ab26040bb85e955fb8f0a?renderMode=0&uiState=64c6f96b2af2012a81a57b54