Mingda Magician X2 LED light mount and cable clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pressure fit LED light mounts for Magician X2. Maybe Magician X with cable clips
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These may interfere with the bulky stepper motor housing and ribbon cable if printing very tall objects. You can remix these any way you see fit just shout me out. Use organic supports for the small overhangs and at least 25% infill for strength on the pressure fitment.
Link to LEDs https://www.amazon.com/dp/B0BGLR8FZZ?psc=1&ref=ppx_yo2ov_dt_b_product_details
Calling them V2 because my first mount hooked around the thin plastic area under the handle and they didnt fit tight and has more potential of interfering.
Im including the STL for the cable clips as well. Use PETG 100% infill. Some kind of double sided tape is needed and two are all you really need. If the cable wont clip in on its own just use a heat gun to spread it open a bit and close it back before it cools again.