Desktop stand for many HUB75 LED panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many "HUB75" RGB LED panels are provided with some magnetized screws for mounting on a metal backplate.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1032
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Many "HUB75" RGB LED panels are provided with some magnetized screws for mounting on a metal backplate. However, I wanted to put mine on the desk. This design holds the panel at an angle, placing the center of gravity in a stable location. Simply screw the included screws in to full thread depth, then push the foot over the exposed grip. Use at least two feet, but if there is a third spot in the center for a screw, you can use that position for additional stability. Some panels may have a small nub that interferes with the top of the foot, but you can simply use side cutters to clip away a bit of the 3D printed part.
I've specifically tested this with the following panels from Adafruit: https://www.adafruit.com/product/2277 and https://www.adafruit.com/product/420
The angle and lengths can be modified by editing the included OpenSCAD file.