1 / 3
Bambu Tool Holder Handle Trims
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trim for the Bambu Tool Holder Handles to make them look better.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 1516
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (43)Powiązane
If like me your Tool Holder handles didn't look very good after removing the supports, I designed these handle trims to snap straight onto the Bambu Lab Tool Holder handles to improve the aesthetic, especially if they are printed in the accent colour.
The handles print face down so if you have a textured build plate you will have the textured side on show. In the pictures I have just pushed them on, however I will eventually glue them in place.