WiltTec airbrush spray booth visor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount visor into WilTec 34278 spray booth. Reduces overspray coming towards you.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 3337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Visor is quckly removable just by lifting from it's place. Visor can be made out of acrylic glass, polycarbonate or real glass, depending your preferences. I made mine out of Polycarbonate.
You need to cut your piece of glass to size and drill four 4mm holes for the screws. Best way to mark screw hole locations is attach mounts to the spraybooth with tape and align glass on place. Then use marker to mark hole locations. This way you get snug fitting visor.
Glass size: 552 x 200 mm
Nuts: M4, 4 pcs
Screws: M4 x 10 mm, 4 pcs (Perfect for 3mm glass. Adjust lenght accordingly)
Link to spraybooth:
https://www.wiltec.de/en/Airbrush-Spray-Booth-Kit-Filter-Extraction-Paint-Art-Craft-9m3-min-LED/34278