Gawr Gura Hair Tie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gura hair tie re-designed to be printed in multiple colors and glued together.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 509
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
As much as I love the original model, I don't like painting so much that I'll spend a few hours modeling and printing instead!
No supports needed, all models are already oriented for printing.
You need a really good first layer because of the small details on the teeth, otherwise everything else is fairly easy to print.
Tolerances might be a bit too tight for some printers. Let me know if you have any issues and I'll make some looser fitting versions if needed.
Printed on an Ender 3 S1 running klipper
- 0.12mm layer height
- 0.2mm first layer
Should work with other settings, this is just what I used to make the slopes look nice.