FCS Fusion Fin Box Installation Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A jig to install FCS Fusion surfboard finboxes
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 820
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base plate for 3/8" bit. Test them all in scrap foam to see what works best for you.
If you don't have that router you can use a Dremel or other rotary tool and eye ball it if you are just doing one installation.
The jig is for fcs Fusion not FCS 2 but I do have and FCS 2 jig as well.
Not exact instructions on how to use the jigs but you get the idea from my website https://www.geckosurfboards.com/surfboard-building-router-jigs/