1 / 1
Can/drink dispenser for NOCCO, pepsi, coke etc.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This despenser is for the 60mm x 150mm cans.
- Ocena
- 2 / 5
- Polubienia
- 55
- Pobrania
- 228
- Wydruki
- 1
- Wyświetlenia
- 3379
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (112)Powiązane
I adjusted the original model spacer to 30mm spacer so it fits the 150mm cans like NOCCO, pepsi, coke etc. I also added ALL models needed to build a complete model.
Just print:
- 1x of each stl uploaded.
- PLA/PETG
- 97% scale on pins, and print with brim!
I recommend printing the pins at 97% scale to better fit the holes, and then use superclue to build the model.