Miniquad Plate Carrier for FPV Drones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strap an extra quad or three to your backpack, belt or MOLLE vest. Don't forget to bring a spare!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've got way too many hobbies to warrant a designated backpack/carrying system for each one, so I created this simple carrier to allow me to use a snowboarding/skateboarding/hiking pack (or any other back with ample compression or storage straps) to carry as many quads as I plan on flying that day.
This has been tested and works with all my various mini quads from 3" to 5" (prop size).
Additional Materials Necessary:
- Shock Cord (elastic)
- Barrel Cord Toggles
This is best printed in flexible filament (I used some cheap 95A TPU) and requires no supports; it's a super simple print. Example prints shown in photos were printed on an upgraded FlashForge Creator Pro.
To assemble, cut shock cord to length and seal the ends with a lighter. Run the ends through the holes in the sidewall of the print to form a “U” shape. Use the toggle clasp to hold the two standing ends of the shock cord together.
To use, simply place the drone into the ‘cradle' of the carrier and slip the loop of the shock cord over the toggle. Tugging on the free ends of the shock cord will adjust the size of the loops to hold the quadcopter securely to the frame regardless of the thickness of the arms. Slide the strap you would like to attach the carrier to through the ‘belt loop’ holes. Simple.
Happy flying.