1 / 2
Lenovo Slim 7 Pro X Laptop Inclinator — zdjęcie 1
1 / 2

Lenovo Slim 7 Pro X Laptop Inclinator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand to raise the back of a Lenovo Slim 7 Pro X laptop to create a more comfortable typing angle and improve cooling.

Ocena
0 / 5
Polubienia
7
Pobrania
45
Wydruki
0
Wyświetlenia
229
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

While I love my Lenovo Slim 7 Pro X laptop, I was bothered by 2 minor annoyances. First, the keyboard is virtually flat, which is not conducive to typing, and second, the small lip on the bottom that raises the laptop to allow air to enter the cooling vents does so only slightly, which restricts cooling efficiency.

I solved both issues with this very simple laptop stand. The semicircular lip on the back of the laptop fits into the groove on the top of the stand. This keeps it in place, so you can move the laptop around without concerns that it will be dislodged.

The stand raises the rear of the laptop by 15mm. The stand is 256mm wide, so depending on the dimensions of your build plate, you may need to print this at an angle.

This may work on other Lenovo slim laptops with a similar ~6mm diameter bead on the bottom, but I am not able to check.

No special printing requirements. Pretty much any material at any layer height.

Designed in Fusion360 and printed on a Bambu Lab X1C:

  • PolyTerra black filament (matte PLA)
  • variable layer height
  • sliced in OrcaSlicer 1.6.3

Tagi