Burnout test for castable resins & colorless natural PLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sample I have created in order to test how castable resins will burn out.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a sample I have created in order to test how castable resins will burn out.
I have already recorded a teaser video about the series I want to create. https://youtu.be/9bUIsm1AtC8
Some pictures of the samles will follow.
The idea is to find a material with good burnout behavior and a clean burn out without leaving ashes behind.
Print instructions
For PLA I have printed them in 100% size and for castable resins in 75% in order to save resin. As you might know most of them are really expensive!
0.2mm layer height and 100& infill
For resin 50 micron would just be fine. Locate it flat on the build surface for faster printing time