Z-Axis for 3018 Pro CNC - Linear bearings and expanded height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
7,68 € – 9,39 € netto (bez VAT)
Dla pliku: 3018 CNC Z Axis for MGN12 Linear Bearings_0.2mm_PETG_MK3S_8h39m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 8,54 € netto (środek widełek).
- Masa podana przez autora
- 112 g
- Czas druku podany przez autora
- 8,65 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Replacement Z axis for Sainsmart 3018 Pro - uses linear bearings for X axis + changes Z height to 150mm.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can use the X axis lead screw and the same left and right Bakelite plates that come with the original kit. The X axis motor and lead screw should line up with the new mount. You can also use the same spindle carriage and Z axis bearings that come with the original Z axis - or you can print your own if you want a larger motor. You will need a longer Z axis lead screw and rods for the taller Z axis.
Parts needed:
The links are to the parts that I used for my build.
I would also recommend 3 perimeters for more strength.