1 / 5
eLeave istick pico vape holster with "snap" - easy to print without overhangs — zdjęcie 1
1 / 5

eLeave istick pico vape holster with "snap" - easy to print without overhangs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of melinos eleaf istick pico holder.

Ocena
0 / 5
Polubienia
1
Pobrania
45
Wydruki
0
Wyświetlenia
647
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

This is a remix of melinos eleaf istick pico holder.

My remix is without overhangs and a little snap to hold the vape in place. It is easy to release but strong enouth to hold it in place when you are running.

I have also enlarged the slot, so now wider belts will fit up to 45mm. All overhangs have been set to 45 °, making the model very easy to print. So you do not need to support or have to worry about whether the print succeeds.

I recomment to print this in PETG or ABS. So use a brim!

Print instructions

If you use TPU, print it slow!

Tagi