Calibrating your printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This test structure is supposed to help calibrating your printer. It is a square ring with outer distance = 100mm and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This test structure is supposed to help calibrating your printer.
It is a square ring with outer distance = 100mm and inner distance 90mm.
Instructions
Print the structure.
Repeat the procedure for both X and Y Axis
(The X axis has a marker included along its way.)
With a caliper measure the outer length and name it "A"
With a caliber measure the inner length and name it "B"
F = 190 /(A+B)
D = (100B / 90 A) / 190
F is the Scale by which the axis is wrong
D is the Delta offset in mm,
In my case F is 1.008, D = -0.09
This means, I will multiply the steps/mm of my axis by 1.008 and
enter the new value.
As D is -0.09 mm this means, I will have to rasp the plastic item by 0.09 mm on all outer and inner faces to get correct dimensions.
Hope this helps!
Category: 3D Printing Tests