Mjx hyper go front shock tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mjx hyper go parts
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 1743
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a shock tower for mjx hyper go after breaking my gfs and not being able to find a decent printable replacement should just bolt right on with no modification tho you might need to drill out the holes for the long pins for the upper suspension arms with a 2.5mm drill bit as I had to with mine even tho I moddled the holes right if this is a problem with any one els pls let me know and il modify the part to have bigger holes I printed in pla at 100% infill with supports I will be makeing more but out of petg at when this one breaks sofar it's been really good showing no signs of breakage after a few hard hits