Universal Filament Spool Reel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert an empty filament spool into a reel. Adjustable to fit most spools.
- Ocena
- 4,333 / 5
- Polubienia
- 43
- Pobrania
- 182
- Wydruki
- 2
- Wyświetlenia
- 1372
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Requires 2 * 6201RS bearings.
The spool is held in pace by friction, and I have not had any issues with slipping to this point.
Parts of this were reused from my spool holder.
I printed in PETG with no supports on any of the pieces, however. I did use helper disks on corners and the threaded end of the handle. The Print in Place (PIP) nob needs to be printed as one object and there is a flat side on the handle that is meant to be put on the build plate.
I printed with 5 perimeters and 30% infil at 0.24mm layer height. This is still a little flexable and does bend a little when reeling up the pool backwash hose in the picture, but at 50ft, it is quite heavy.
Press and lock the nob+hub into the arm with a little force.
Press the bearings in to the cone and the arm. I was able to press them in by hand without any tools.
All feedback is welcome!