Filament diy dryer support for 3D printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament dryer mount for 3D printers Original Prusa MK3S+ (MK4 I hope), also adaptable for other brands and models.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This support has been meticulously designed to seamlessly integrate with the "DIY Dehumidifier for 3D Printer Filaments" on an Original Prusa MK3S+ printer. Although I haven't had the opportunity to conduct a test run, I firmly believe that it can be equally compatible with an MK4 model.
Moreover, considering its dimensions, all the printed parts and components can be effortlessly fabricated utilizing an MK3S+ printer, employing either PLA or PETG filaments.
It is worth noting that some supplementary screws will be required for assembly; however, it is a noteworthy advantage that no modifications to the hardware are necessary.
Furthermore, this support boasts several strategically placed additional holes, facilitating its adaptability to other printer models through the utilization of T-nuts.
Currently, I am working on an additional support structure that will enable direct filament placement, when the filament dryer is not needed.
BOM
| Description | Reference Image | Qty | |
|---|---|---|---|
| 1 | printer_dryer_mount |  | 1 |
| 2 | bracket_center |  | 1 |
| 3 | bracket_left |  | 1 |
| 4 | bracket_right |  | 1 |
| 5 | M4 x 12 x 0,7 flat allen screw |  | 6 |
| 6 | DIN 912 M3 x 20 x 0,5 hex screw |  | 4 |
| 7 | M4 x 0,7 square nut |  | 6 |
| 8 | M3 x 0,5 hex nut |  | 4 |
| 9 | M3 x D8,2 x h1,3 mm washer (thick washer) |  | 4 |
Assembly
- One at a time, replace the 2 M3x12x0.5mm screws holding the "Z-axis-top-left" with 2 M3x20x0.5mm screws.
- Using the M4 flat screws ant the M4 square nut, assemble the printed parts together.
- Position the assembly over the frame and onto the M3x12mm screws, securing it using the M3 nuts and washers.
- The power supply cable can be placed on either side of the bracket.
I hope you find this useful.
Happy printing.
DIY Dehumidifier for 3D Printer Filaments
https://www.printables.com/model/494417-diy-dehumidifier-for-3d-printer-filaments
Filament spoolholder for dryer support (on 3D printer)
If you need to continue printing while drying filment at the same time, you can check this model:
https://www.printables.com/model/587294-filament-spoolholder-for-dryer-support-on-3d-print