Pool Drinks Holder - 35mm Ø frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A can/glass/bottle holder to hang you drinks over the side of a 35mm diameter frame pool.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yes, another beverage holder to hang over the side of your pool and enjoy a nice cold drink on those hot summer days. Unless it' 2023 and you're in the UK.
Print both parts (the hanger on its side, and the carrier on its base) and simply glue together. The best glues for PLA are cyanoacrylate (CA) glues, also known as super glues.
This was designed for pools similar to the Outsunny Steel Frame Pool with 35mm diameter poles. Intended to fit our plastic garden tumblers, but as you can see from the photos, works with cans/bottles too.
I printed in PLA with 0.4 nozzle, 2 walls, 15% infill, 4 top/bottom layers, and no support.
Happy summer, hope the weather has been better than ours in the UK.