V6 Drink Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After seeing the popular V8 drink holder, I decided to model a V6. Drinks DO tend to come in 6-packs, after all!
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 341
- Wydruki
- 1
- Wyświetlenia
- 2645
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution
Printed with tree supports at 15% infill on my Prusa Mini. I included the .3mf file for the outside body because it required quite a bit of tuning to get everything to fit on the build plate.
The body of the V6 was glued together using JB Weld Plastic Bonder and has not leaked since I applied it. Use your best judgement to determine your filaments and glue!
The handle is a standard 1" wooden dowel that you can get at any hardware store and it fits into the connecting rods with a loose fit. A little bit of CA glue prevents it from moving side to side, or you can choose to wrap twine or paracord around it to give it a good grip and prevent any lateral movement.