Olympia SG-1 Margin Markers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement margin markers for old Olympia SG-1 Typewriters
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
The old, brittle plastic margin markers on my Olympia SG-1 broke. Needed new ones, so I modeled these out. They fit and work, but are very thin. If you are printing in resin, be sure to mix in a good amount of flex resin, or you'll probably just break them. I filled in the intented markers using a red Sakura Pigma Micron PN pen. It is not opaque like the original, but it stays on the plastic and is visible enough to see where your margins are. I printed them flat on the bed, because trying to cut off supports broke them for me (but that was before I mixed in enough flex resin.)