Filament Storage Rack, Step included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular storage rack, for shelves etc.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 1290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple yet effective way to store your Filament. Sizing is determined by the length of Rods you'll be using. if you use Solid rods, you can easily span this one meter. want more? add a 3rd printed piece and get an extra meter (didnt test how far you can go with only 2 printed parts, but its constructed extremely rigid). As long as your rods dont bow, feel free to go as big as your rods can hold up ^^
You'll need a printer with at least 255mm width. you could shave off a few mm, but you may run into clearance issues at the bottom or between the 2 levels.
Rod Diameter used: 15mm. I used aluminum tubes with 2mm wall thickness.
STEP file is included if you want to take your spin on it.