JerryRigEverything Knife Blade Catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Blade catch on my knife broke so I designed one to replace it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
The Blade catch on my knife broke so I designed one to replace it. The one in the image was an older version that had the same ridges that the original one had. the ridges printed terribly so I decided to cut them from the finished model.
I printed mine out of Bambu Lab PAHT-CF because I was also printing more structural parts at the time but I'm sure basically any other filament would work.
Tolerances are built into the part as my printer was making the Y dimension a bit large so it should fit without any post processing, though you milage may vary.