Tiny Top Hat for Dolls and Stuffed Animals -- Center Prints w/o Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a tiny tophat I designed for a creature friend.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support.
If you find this model useful, feel free to buy me a coffee.
Here's a tiny tophat I designed for a creature friend.
I wrapped mine with black fabric and a tiny ribbon to make it look more like the real thing.
You can scale this to make it the right size for your little friend. The hat hole is 39mm x 52mm.
The pipe portion contains a cone at the top to make it printable without supports. The hat brim does need supports, however. To configure properly, set your "Support Overhand Angle" to 58 degrees. Otherwise you'll have an unnecessary support tower in the middle that will be very hard to clean out.