Gita/Sportcross Boot Shroud Clip and Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gita/Sportcross Boot Shroud Clip and Pin. Originals are out of stock and discontinued
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Gita/Sportcross Boot Shroud Clip and Pin.
Originals are out of stock and discontinued so I made one,
Its functionally the same as the Toyota part and the clip and pin work with original parts.
Toyota/Lexus pt no 64933-53010-A0/C0
I've printed them in PETG .2, but you could print the clip in a strong TPU. (edit yes clip prints well in TPU see photo of 2 white clips)
The clip is a bit delicate and prone to breakages.
4 Files included, a standard 3mf for each and a PrusaSlicer2.6.0 project file for each
Printing the clip with a small raft makes peeling the little bit of support off much easier.
Pin prints best with upside down with support