Adjustable Endstop holder for Delta Kossel with 2020 AL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder for cheap standard chinese optical endstop PCBs is height adjustable via M3 bolt, that pushes against the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This holder for cheap standard chinese optical endstop PCBs is height adjustable via M3 bolt, that pushes against the upper edge of the vertical linear rail mounted on 2020 Al extrusion in delta kossel printers like the Anycubic Kossel Linear Plus.
The endstops are mounted with M3x12 bolts and M3 nuts. The holder itself is mounted with a M4x6 bolt and a hammer nut in the extrusions groove.
The adjustment bolt should be at least 16mm (what gives 1mm height adjustment - when you need more you should carefully review your printbed and its holders or the whole construction).
You obviously also need some sort of "flag" to interrupt the beam in the optical switch - find the best of thousands in thingiverse or construct one by yourself ;-).
Category: 3D Printer Parts