Ninebot MiniPro Street handlebar mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is a replacement for the incredible heavy und bad designed handlebar delivered with the original Ninebot…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
This mount is a replacement for the incredible heavy und bad designed handlebar delivered with the original Ninebot Mini Pro Street in Germany and Austria. It is designed to hold a piece of rustless waterpipe with 15mm outer and 13mm inner diameter as handlebar.The endplugs have a gap to clamp the end of wrapping tape. The holes are for cutting a M6 thread to take M6 bolts.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
25%
Notes:
I printed the part with PLA. I sliced and printed with supports, but after my first and only print i changed the design. The bellholder extension is flat with the body now - therefore it may work without supports...
I have used Cura 3 and chose Zigzag-infillstructure.
Category: Sport & Outdoors