Reel for Tesa film / Sellotape / Scotchtape type dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy print replacement. Lost mine, made another. Main section approx 25mm diameter x 20mm wide . Axel 3.6mm x 27mm wide
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on original, made for a quick n simple print … align “axis” directly upwards, add supports on build plate - did mine at 0.2mm in ASA but sure petg and pla would be fine.
Carefully remove supports, clean ends if necessary and use.
… if you prefer a cleaner print with no bridges or supports, then use the … HALF.stl file - print the two halves and glue together.
If you want to say thanks, feel free to hit support designer next to my profile, or you can send filament tokens to me here