1 / 6
Enclosure for Prusa mk2-mk4 made from IKEA-LACK
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As requested I finally published the stl-files for my IKEA-LACK enclosure Ive been using since 2017. Fits Prusa mk2-mk4
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1062
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
In addition to the printed parts and an IKEA LACK table you will need:
- 1 plexiglass sheet
- 4 M3x8 screws
- 4 M3 nuts
- 2 M3x40 screws
- 8 mounting screws 4,2x14 mm.
- 2 small magnets
- 1 roll sealing strip for doors 2x8 mm
I printed the parts in PLA with PETG or ABS works equally well.
I have no building instructions for the moment, but I think you can solve the “pussle” by looking at the pictures. Ask me if something is unclear.