1 / 4
Globe shade for floor lamp, 9.5" OD x 8.5" tall x 1.675" neck opening — zdjęcie 1
1 / 4

Globe shade for floor lamp, 9.5" OD x 8.5" tall x 1.675" neck opening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

replacement globe shade for a floor lamp that my kid had knocked over and broken

Ocena
0 / 5
Polubienia
40
Pobrania
180
Wydruki
0
Wyświetlenia
1052
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Public Domain

My 2yo knocked over the floor lamp in his nursery, and broke the glass globe.  I could not find anything on the internet to replace it, so I whipped one up in CAD with a little style, with flutes that look like cut glass or pleats.  It is 9.5" OD, 8.5" tall, the neck opening is 1.675", and the wall is 0.100" thick.  I printed it on a Bambu X1C with transparent PETG Basic filament.  I printed upside down, with the flat on the bed, at normal (0.2mm) layer height, with 100% fill via concentric infill.  All other settings are standard.  It took over 600g of filament, and 20 hrs.  I used support (the same PETG) over 20 deg, and it was a real pain to remove and left a nasty surface.  The print also had some defects, quite a bit of stringers, but I was able to clean it up OK.  When installed it kinda looks like a paper shade, and my wife likes it so that works for me!  I included the source Solidworks files so you can manipulate it if you want.

Tagi