1 / 4
Airgap drain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
For the installation of my water softener I needed an airgap between the softener and the sewer.
An 1/2" hose wil fit on the top whit an hose clamp.
The outlet is customizable an will fit in to an 40mm drainpipe
The airgap is made with two parts and printable without support. The two parts fits snugly together and can eventually glued together with some CA glue
Update v2: The funnel part was a bit to small, but in the scad file is it now customizable
Print instructions
Category: Household Summary
Print Settings
Printer:
Tronxy
Rafts:
No
</div>Supports:No
Resolution:
0.2
</div>Infill:15%
Filament: Formfutura PLA Black