Lock for childproofing a closet door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Barrel Bolt style lock for child proofing a closet door - alternative to a doorknob cover
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 603
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
My 2yo just figured out doorknobs, and he got into the cleaning supply closet the other day. I was going to make a doorknob cover, but then I had the idea of making a sliding lock that is out of his reach. The result is alot cleaner looking, and less annoying for the non-toddlers.
The travel is .75". I printed it with a Bambu X1C, is PLA basic, no support (it bridged fine), with 0.2mm layer height, 50% fill. It took 45 min and ~20g of filament.
I used my handy-dandy calculator (check my profile for more details) that uses a calibration to dial in the size and fit of parts…and it worked perfectly. I aimed for a 0.010" gap all around, and my calibration sheet resulted in a perfect fit.
It is mounted to the wall, trim actually, with 2x 16mmx70mm 3M command strips.
Source SolidWorks files are attached if you want to tweak it for your own needs