Bipod Mount for Umarex Hammerli Hunter Force 900 Combo with Picatinny Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bipod Mount for Umarex Hammerli Hunter Force 900 Combo with Picatinny Rail
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to make a bipod mount for my Umarex Hammerli Hunter Force 900 Combo airgun. I downloaded the bipod from here:
https://www.printables.com/pl/model/357606-bipod-for-picatiny-retractable/comments
I made three variations of the spring tension tube mount. First I made a short mount, but I found it a bit too low and not comfortable, so I made a long mount. Then I thought it was a waste of space and made some Picatinny rails on the sides for attaching, for example, a flashlight, etc. And that's how the 3rd variation was created, which I haven't printed yet. The mount should be screwed to the spring tension tube. I drilled and tapped the screw hole.
Print on the flat side. Requires supports, I used organic ones. PET-G material, 60% filling. I hope someone finds it useful. I'm still working on the right version.