[Action] Car Tablet Mount 100mm bar space
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bought them, found out the it doesnt fit my renault (figures). So printed out a custom bracket.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Bought the car tablet holder, its cheap, its good enough.
https://www.action.com/nl-nl/p/lab31-auto-tablethouder/
Later i found out that the universal tablet mount isnt as universal as i would like.
The minimum distance is 100mm i needed for a renault espace IV.
The minimum of this was about 120mm.
Printed out a bracket that should fit the ball joint as is. Add felt if you want to protect the inner bar for the headrest. Print with supports. But add a no support block on top (the sphere).
Its a quick print / post before i head out on a 30+h drive. So sorry for the low quality post.
Worked fine ( took my printer on vacation too ). But if your headrests are not removable if e.g. you have a screen on ( i had 2 of them ) the headrest. you need a split body in order to put it on. I tried twisting it on but it cracked the print. Hence the V2 uses 2 M3 screws in order to clamp on the headrest.