1 / 2
Umbilical Plate (V0.2 Dragon Burner + EBB36 + Sherpa Micro)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Umbilical plate for Voron 0.2 carriage with Dragon Burner, EBB36 and Sherpa Micro.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 320
- Wydruki
- 2
- Wyświetlenia
- 3820
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 9)Remiksy (1)Kolekcje (71)Powiązane
Used in a Voron 0.2 setup with:
- Dragon Burner
- BTT EBB36 CAN board - **warning**: not compatible with max31865 for now!
- Sherpa Micro extruder
BOM:
- 2x 25mm aluminum standoff
- 4x M3 x 6 mm BHCS
- 2x M3 x 10 mm BHCS
- 2x M3 x 4 x 5 mm heat insert
Important: You must use M3 BHCS (button head) screws! If you use SHCS screws, the screw head might touch and short-circuit your CAN board.
The CAD project is available via OnShape.