1 / 1
DIY Print Bed Filament Dryer PLA+ 55C 4hours — zdjęcie 1

DIY Print Bed Filament Dryer PLA+ 55C 4hours

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DIY Print Bed Filament Dryer PLA+ 55C 4hours

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
597
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

DIY Print Bed Filament Dryer PLA+ 55C 4hours

added
G28 W ; home all without mesh bed level
to the G code

like this

G90 ; use absolute coordinates
G28 W ; home all without mesh bed level
G1 X100 Y200 Z200.0 F720 ; move x-axis to top to make space for box and move printer bed to front

this stopped the printer from crashing in to itself at start-up

 

FilamentDryer TemperatureDrying  Time (Hours) 
PLA55°C (131°F)> 3
ABS65°C (149°F)> 3 
PETG65°C (149°F)> 3 
Nylon75°C (167°F)> 12 
Desiccants65°C (149°F) > 3
PVA 45°C (113°F)> 10 
TPU/TPE55°C (131°F)> 4 
ASA65°C (149°F)> 4
PP55°C (131°F)> 6 
HIPS   65°C (149°F)> 4                   
PC75°C (167°F)> 6
PEEK75°C (167°F)> 6 

These recommendations are made under the following conditions.
Ambient RH:50%
Ambient Temp:25°C
500g filament spool

Credit : https://www.reddit.com/r/3Dprinting/comments/yhkc2p/pla_oven_drying_temperature/