Miranjo's Cloak Piece from Ranking Of Kings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a replica of Miranjo's cloak piece from Ranking Of Kings
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find a model for Miranjo's little cloak badge thing from Ousama Ranking anywhere so I designed my own in fusion360. I made it a bit cartoon-like to keep how it was in the style of the show. It also has a small latch to print and snaps into place in the back so you can actually use it for cosplay. It is a tight fit but if it doesn't snap in, use some super glue.
I had to scale it up to around 3,000% to get it to the scale in the picture, forgot to scale it in fusion.
Printed at 0.28mm layer height, 2 walls, 15% infill, no supports, although you can add supports for the small slits in the rear of the badge if you'd like if you have bad bridging.
Print orientation is shown in the pictures.
Enjoy!