Beyblade Arena
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My biggest self-designed 3D printing project so far (overall size 536 x 371 x120mm).
- Ocena
- 4,667 / 5
- Polubienia
- 112
- Pobrania
- 507
- Wydruki
- 4
- Wyświetlenia
- 6801
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
My biggest self-designed 3D printing project so far (overall size 536 x 371 x120mm). I designed and built a beyblade arena for my kids.
The arena is made of several parts because I wanted to minimize the amount of material. Nevertheless this is a quite filament consuming project but I really like the result and my children are happy.
After printing and clueing the floor with 2 component adhesive I used filler material and grinding to get a smooth surface (especially in the middle of the arena). I also painted (with aerosol lacquer) the floor.
To build the arena you will need 2 pieces of all the parts, a couple of screws and nuts (M3, 3x20,...) and e.g. epoxy resin to clue the parts together.
UPDATE: a detailled instruction for assembly etc. can be found at: https://www.instructables.com/member/Legufix/instructables/