Star Trek Voyager cortical stimulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build the Doctor’s cortical stimulator from Star Trek Voyager!
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 424
- Wydruki
- 8
- Wyświetlenia
- 1076
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is a simple kit to build the Starfleet cortical stimulator as seen on Star Trek Voyager. As all parts are separated, no painting or colour swapping is required. I modelled the prop to the best of my abilities, using photos of screen-used and replica versions for shapes and proportions. I suppose the size is quite close to the original prop, if you prefer it smaller or larger however, just rescale the files in your slicer.
I recreated the LEDs with some mono component resin and paint, however I also added the parts as STLs in case you want to print them. I recommend printing the LEDs in clear filament (clear PLA/PETG) with 100% infill.
For better printability I separated the main body. The body and back panel can be connected with the alignment pins.