Pegboard Hook Display Spinner - Supporters edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
easy to print with minimal pieces to add to finish your model
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Supporter Version includes:
access to more options and design customizations
direct help from me if you require any additional addons (within Reason)
some STEP files for personalization
MY DIRECT APPRECIATION for helping me fund more designs and prototypes for the community
Easy to print Keychain Pegboard Hook Holder
Premade supports for the Bottom you can either remove them or keep them as part of the sealed base its up to you!
Uses standard 1" spacing /w 6mm hook diameters
Straight Hook adapter will fit both angled and straight hook Designs, it was created ideally for use of dual peg/basket or cups that had a 1" peg spacings
Straight peg hooks will not sit properly in the non Straight Adapter Spinner
Hollow bottom for you to add weights like BB's or Pellets (supports included in design)
Hardware needed:
x2 M3 Heat inserts or 1/2" Screws per Spinner bottom
Pellets or BB's
2.5x1mm Zip Ties
10 or 12x3 or 10 or 12x4 magnet (top cap for price tag options)
1" Wood doweling (height is up to you but recommend no more then 2 stacks tall)
1" spacing hooks x 5.4mm or less pegs (recommended to not go longer then 6")
Cup hook adapters:
65mm cups similar to this https://www.amazon.ca/dp/B09WZVT9NW?ref=ppx_yo2ov_dt_b_product_details&th=1
Pegboard Adapters:
Base has a Diameter of 154mm (6")
3D PRINTING SETTINGS
-Voron Spec Recommended
Minimum Print Settings:
4/4 Top/Bottom
4 or 5 walls
20-25% infill
If you enjoy these designs please consider purchasing the files off Cults3D or buying me a coffee as every dollar gets put back into more designs and creations!
Revisions:
Aug 14
Added Pegboard cup adapter and cup options (step files included to customize your depth (just open in fusion goto side view and move the bottom by layer to desired depths - 72mm by default)
Oct 18
Added wide bases so you can insert your already printed units for a wider base for stability or extra display purposes