Prusa Enclosure HEPA Filtration 120x120 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter system with Original Prusa HEPA Filter
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 2483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Modifizierte Halterung für den originalen HEPA Filter von Prusa, passend für einen 120x120 Lüfter am originalen Ausgang hinten links.
Statt des Umwälzens der Luft im Gehäuse, wird die warme Luft aus dem Gehäuse geblasen.
Optional kann man eine Temperaturregelung verwenden.
Ich habe folgende Teile verwendet: siehe BOM
________________________________________________________________________________________________________________
Modified bracket for the original HEPA filter from Prusa, suitable for a 120x120 fan on the original exit rear left.
Instead of circulating the air in the enclosure, the warm air is blown out of the enclosure.
Optionally, you can use a temperature control.
I have used the following parts: see BOM
________________________________________________________________________________________________________________
BOM:
4x M4x40
1x Noctua NF-F12 (https://www.amazon.de/gp/product/B00KESS6O0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
1x W1209 LED Digital Thermostat (https://www.amazon.de/gp/product/B08NTJ6LPT/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1)
1x Trafo 12 V (https://www.amazon.de/gp/product/B01G0Q3RWU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)