Celestron X-Cel LX Eyepiece Case - 9mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for securely holding and transporting the Celestron X-Cel LX 9mm Eyepiece. First in a set I'm working on.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The first in a line of eyepiece cases I'm working on to encompass my whole eyepiece collection. This case is built around the Celestron X-Cel LX 9mm Eyepiece. It's a very tight fit (by design), so it's unlikely it will work with any other eyepiece, even in the same series. But if people are interested, I'll be happy to share the .step so people can modify to suit their needs - or if you ask nicely and provide detailed measurements, I can whip one up for you!
The case is intended to be printed with PETG for the primary case and cap. The remaining pieces are intended to be printed in TPU, and are added as liners to the main hardshell case. This 2 layer system is intended to provide a reasonable degree of shock absorption and fall protection to the case.
Reccomended Settings
Case & Cap
Walls: 6
Infill: 25%
Layer Height: 0.2mm
TPU Liners
Walls: 3
Infill: 10% concentric
Layer Height: 0.2mm
The screw threads on the bottom of the cap are there so that each case can screw into a carrying case that I'm going to post later for ease-of-transport