Prusa Frame Prusament Spool Holder Auto Rewind
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Mk3 frame Specific. Primary reason for this was filament sometimes on new spools coming off the spool.
- Ocena
- 3 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 1103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Prusa Mk3 frame Specific. Primary reason for this was filament sometimes on new spools coming off the spool. Like on an auto Z calibration or when I Move Z up to much with a new spool.
The Spring is a one way spring. The holder is designed to mount the spool only one way.
The rewind spool was modified form the great design by Vincent Groenhuis https://www.prusaprinters.org/prints/168-universal-auto-rewind-spool-holder-mm
I am not interested in creating different sizes our variations for different filament spools. I'm a Die Hard fan of Prusament filament.
These stl files are for single color. If I have extra time I may update with the Multi color stl files since I would need to re-export them. If you have fusion, you can export them out.
The fusion file was cobbled together from different projects. It will do for anyone wanting to mod this.
Print instructions
Prusament PETG or your choice.
If you don't use the filament guide:
-(3) M3 25mm screws
-(3) M3 Locknuts
If you use the filament guide:
-(2) M3 25mm screws
-(1) M3 35mm screws (might have to trim a little to make flush)
-(3) M3 Locknuts