Z-REX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z-REX's (pronounced "Zee - Rex") are small, easy and fun prints of a dinosaur model... with an opening mouth / jaws and
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
No support required... just print it with at least 3 shells and 50% or more infill to make the jaws / mouth springy so they open and close.
At standard scale Z-REX's are 125mm long. You can safely uniformly scale them up (as this will increase internal clearances), but scaling them down may result in the mouth / jaws not moving.
Please refer to the images provided and print instructions for additional information.
Print Settings:
Rafts: Doesn't Matter
Supports: No
Resolution: Standard / 0.20mm
Infill: 3 or more shells with 50% or more infill