1 / 2
3/8in Compression Cap Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We started demolition on our bathroom for a remodel after the kids went to bed and found that one of our sink valves had gone out and was dripping. It's after midnight, the stores are closed.
So... I looked up the schematics on a cap, modeled it in Fusion, and sent it.
Probably not great for long-term use, but it's held up for the last half hour with nary a drop!
3MF file is built for Bambu Studio 1.7 and has a height modifier to print the threaded part at 0.08mm. Took about 20 minutes to print. Use a strong material, PLA+/PETG.