1 / 3
65mm (C-band) LNB holder for Mabo 180cm offset dishes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 65mm (C-band) LNB holder for Mabo 180cm offset dishes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 820
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 65mm (C-band) LNB holder for Mabo 180cm offset dishes.
Additional material:
- 3 M5 bolts of varying lengths
- 3 M5 nuts
1 M5 washer
You may be able to do without the nuts and washers tentatively, because the bolt threads will cut into the plastic and hold steady.OpenSCAD sources may be found on GitHub.