1 / 2
Jumper/GPIO Wire Desk Tidy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desk tidy for 200mm Jumper Wires. No supports required!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Here is a compact desk tidy to organise the multitude of 200mm jumper wires that you'll no doubt be using for your Raspberry Pi/Arduino projects. It also incorporates a basket to hold other small components.
The item in the picture has been printed using:
- Prusa MINI+
- PrusaSlicer 2.6.0
- eSun eSilk PLA
- 0.4mm Nozzle
- 0.2mm Layer Height
- 200°C first layer, 190°C other layers
- 60°C Bed
- 2mm Retraction